MB Slot Spares
Last updated: Wednesday, February 10, 2010
MB Slot from Italy, produce a wide range of high quality precision Slot Racing Spares & Slot parts for tuning all makes of Slot cars. Look out for the suer range of alloy wheels which take a variety of photo-etch wheel inserts
MB slot now produce a Slot cars ideal for home or club use MB
Slot Slot Cars
MB slot hand controllers ideal for home or club use MB
Slot hand controllers & Pit
Boxes
  |
| MB Slot Spares
sections |
|
| Ref | STORAGE | Availability | Price |
| MB18000 | Small Plastic storage tray with 8 seperate lid containers. Ideal for storing your tiny spares such as Pinions, Washers, screws etc. 8x6x2cm |
In Stock | 1.80 |
| MB18001 | Plastic Storage Tray with 18 compartments ideal for storing spare parts 21x12x3cm | In stock | 4.00 |
| MB18002 | Plastic Storage Tray with 12 compartment / dividers ideal for storing spare parts 26x12x4cm | In Stock | 6.80 |
| MB18005 | Plastic Storage Tray with 5 compartment / dividers ideal for storing axles | In Stock | 5.00 |
| MB18006 | 5x Plastic Box with screw on cap for storing motors | In Stock | 5.00 |
| MB19066 | Plastic container with needle point applicator. Ideal for braid/tyre conditioner, lubricating oil | In Stock | 3.00 |
| top | |||
| Ref | UNIVERSAL CHASSIS | Availability | Price |
| TU001 | MB Slot Universal Chassis - Axles & Connecting Rods Kits | In Stock | 7.50 |
| TU002 | MB Slot Universal Chassis - Plastic Chassis Parts | In Stock | 10.00 |
| TU003 | MB Slot Universal Chassis - Complete In Line Chassis
Kit supplied with parts* required to build into an RTR chassis supplied
with GNIK 023 motor *(additional parts required - motor cable, eyelets & braid) |
In Stock | 35.00 |
| TU004 | MB Slot Universal Chassis - Guide Housing | In Stock | 2.50 |
| TU005 | MB Slot Universal Chassis - Front Axle Support | In Stock | 2.50 |
| TU006 | MB Slot Universal Chassis - Chassis Main Frame | In Stock | 4.00 |
| TU007 | MB Slot Universal Chassis - Chassis Mounting Parts A | In Stock | 2.25 |
| TU008 | MB Slot Universal Chassis - Chassis Mouting Parts B | In Stock | 2.25 |
| top | |||
| Ref | Pagani Zonda / Ferrari 430 Car Spares | Availability | Price |
| MBA0719 | Zonda Chassis for Angle Winder Mount | In Stock | 5.00 |
| MBA0720 | Zonda Chassis for In Line Mount | In Stock | 5.00 |
| MBA0721 | Angle Winder Motor Mount (Zonda / Ferrari) | In Stock | 5.00 |
| MBA0722 | In Line Motor Mount (Zonda / Ferrari) | In Stock | 5.00 |
| MBA0723 | Tyre Pack 2x Front & 2x Rear (Zonda / Ferrari) | In Stock | 4.00 |
| MBA0724 | Zonda Windscreen, Mirrors & small parts pack | Back Order | 4.00 |
| MBA0725 | Zonda Vac Formed windscreen & interior | In Stock | 4.50 |
| MBA0726 | Front Axle Support (Zonda / Ferrari) | In Stock | 5.00 |
| MBA0727 | Front Axle Support with independant axles (Zonda / Ferrari) | In Stock | 9.00 |
| MBA0729 | Zonda Rear Spoiler & mall parts pack (black plastic) | In Stock | 4.00 |
| MBA0730 | Motor adaptor fits small can motors into long can mounts. (eg Fit a Scalextric mabuchi into a Ninco chassis in place of an NC5) | In Stock | 4.00 |
| MBA0732 | 4x Bronze Axle Bearings use with A0721 & A0722 mounts | In Stock | 5.00 |
| MBA0733 | Ball Race Axle Bearings 1 flange use with A0721 & A0722 mounts | In Stock | 8.00 |
| MBA0740 | Ferrari F430 Chassis In Line | In Stock | 5.00 |
| MBA0741 | Ferrari F430 lightweight vac formed interior | In Stock | 4.00 |
| MBA0742 | Ferrari F430 Windscreen, mirrors & wipers | In Stock | 4.00 |
| MBA0743 | Ferrari F430 vac-formed windscreen | In Stock | 4.00 |
| top | |||
| Ref | MB SLOT GEARING | Availability | Price |
| MB07002 | 32z Angle Winder Spur Gear 18mm Blue | In Stock | 5.00 |
| MB07003 | 34z Side Winder Spur Gear 19mm Black | In Stock | 5.00 |
| MB07006 | 36z Side Winder Spur Gear 19mm Yellow | In Stock | 5.00 |
| MB17024 | 3/32 Crown In line 24z gear + Stoppers Brass & Ergal. Ideal for meshing with variety of pinion sizes |
In Stock | 5.00 |
| MB17025 | 3/32 Crown In line 25t gear + Stoppers Brass & Ergal Ideal for meshing with variety of pinion sizes |
In Stock | 5.00 |
| MB17026 | 3/32 Crown In line 26t gear + Stoppers Brass & Ergal Ideal for meshing with variety of pinion sizes |
In Stock | 5.00 |
| MB17027 | 3/32 Crown In line 27t gear + Stoppers Brass & Ergal Ideal for meshing with variety of pinion sizes |
In Stock | 5.00 |
| MB17020 | In Line Crown Gear Stopper with ball race bearings | In Stock | 8.00 |
| MB19225 | Mixed Pinions 8t-9t-10t-11t use with MB Slot Crown gears | In Stock | 4.50 |
| MB19249 | x2 Pinions 8t steel Inline use with MB Slot Crown gears | In Stock | 3.50 |
| MB19250 | x2 Pinions 9t steel Inline use with MB Slot Crown gears | In Stock | 3.50 |
| MB19251 | x2 Pinions 10t steel Inline use with MB Slot Crown gears | In Stock | 3.50 |
| MB19260 | x2 Pinions 11t steel Side/Anglewinder use with MB Slot Crown gears | In Stock | 3.50 |
| MB19261 | x2 Pinions 12t steel Side/Anglewinder use with MB Slot Crown gears | In Stock | 3.50 |
| MB08012 | x2 Pinions 12z Steel 7.5mm use with MB Slot AW spur gears | In Stock | 4.00 |
| MB08013 | x2 Pinions 13z Steel 7.5mm use with MB Slot AW spur gears | In Stock | 4.00 |
| MB08014 | x2 Pinions 14z Steel 7.5mm use with MB Slot AW spur gears | In Stock | 4.00 |
| MB08027 | 27z Angle Winder Gear use with 3/32 axle | In Stock | 4.50 |
| MB08028 | 28z Angle Winder Gear use with 3/32 axle | In Stock | 4.50 |
| MB08029 | 29z Angle Winder Gear use with 3/32 axle | In Stock | 4.50 |
| MB08030 | 30z Angle Winder Gear use with 3/32 axle | In Stock | 4.50 |
| top | |||
| Ref | GUIDES, BRAIDS & EYELETS | Availability | Price |
| MB17030 | 2x Universal Pick Up Guides with leading blade & screw fixing | In Stock | 4.00 |
| MB17031 | 2x Universal Pick Up Guides with leading blade & push fixing | In Stock | 3.50 |
| MB17032 | 2x Universal Spring Guides with screw fixing | In Stock | 4.00 |
| MB17033 | 2x Plafit Style Pick Up Guides with leading blade & screw fixing | In Stock | 4.00 |
| MB07013 | 8x Special Motor Cable Brass Eyelets for Guides | In Stock | 2.50 |
| MB19079 | 1meter Ultra Thin Tinned Copper Racing Braid | In Stock | 4.80 |
| MB19080 | 1meter Ultra Thin Copper Racing Braid | In Stock | 4.80 |
| MB19081 | 1meter Motor Cable 1mm o/d | In Stock | 3.70 |
| MB19082 | 10x Motor to Guide Cable Eyelets | Back Order | 2.50 |
| MB08031 | 1meter Tinned Copper Braid Ultra Flex | In Stock | 4.80 |
| MB07007 | 6x Springs for Guides | In Stock | 3.00 |
| top | |||
| Ref | SUSPENSION KITS | Availability | Price |
| MB19111 | Suspension kit - fit to motor mounts to allow mount
to rock in chassis. Kit comprises of 2x Brass Pins to adjust tension, 4x coil springs (2x Hard, 2x Soft), spring locating washers & circlips |
In Stock | 6.40 |
| MB19112 | 4x Replacement coil springs (2x Hard, 2x Soft) for suspension kit | In Stock | 3.00 |
| MB19113 |
1x Replacement Brass Pin & locating washers for suspension kit | In Stock | 3.00 |
| MB07008 | 8x Circular Magnets (for 19111suspension kit) | In Stock | 6.00 |
| MB07011 | 2x Short Pivots (for 19111suspension kit) | In Stock | 3.50 |
| MB08005 | 8x Spring Locating Washers (for 19111suspension kit) | In Stock | 2.50 |
| MB08006 | 4x Brass Suspension pins (for 19111 suspension kit) | In Stock | 2.50 |
| top | |||
| Ref | MOTORS | Availability | Price |
| MB17001 | Motor GNIK 021 21,000rpm @ 12v (NC5 / Boxer / King size) c/w 9z pinion | In Stock | 15.00 |
| MB17002 | Motor GNIK 023 23,000rpm @ 12v (NC5 / Boxer / King size) c/w 9z pinion | In Stock | 15.00 |
| MB17003 |
Motor KRAHS 023 23,000rpm @ 12v (NC1 / V12 / Shark size) c/w 9z pinion, will drive from either end of the can. | In Stock | 15.00 |
| MB07009 | Motor SongNA 023 21,000rpm @ 12v (NC5 / Boxer / King size) "HIGH MAGNETIC POWER" | In Stock | 15.00 |
| MB08003 | MB Slot Motor "DODO" 23000 RPM 12 volt High magnetic power |
In Stock | 15.00 |
| top | |||
| Ref | 3/32 AXLES & BEARINGS | Availability | Price |
| MB19020 | 2x 3/32 Bronze Axle bearings with chanfered face for reduced friction to fit MG Vanquish Cars | Sold Out | |
| MB19022/B | 2x 3/32 Bronze Axle bearings with chanfered face, approx only 1mm of the bearing surface in contact with the axle for reduced friction | In Stock | 5.00 |
| MB19023 | 2x 2.5mm Bronze Axle bearings with chanfered face, approx only 1mm of the bearing surface in contact with the axle for reduced friction | In Stock | 4.00 |
| MB19025 | 2x 3/32 Nylon Axle Bearings | In Stock | 3.50 |
| MB19027 | 2x 2.5mm Nylon Axle Bearing Suit Ninco | In Stock | 3.50 |
| MB19050 | 2x 3/32 Ball Race Axle Bearings mounted in alloy bearing housing to fit most chassis | In Stock | 12.50 |
| MB07001 | 3/32 Ground Axle Blank 54 mm for use with Sidewinder motors. Centre of axle is gound undersize to give greater clearance between motor casing and axle. | In Stock | 2.00 |
| MB07010 | 1x 49mm 3/32 Hard Steel Blank Axle | In Stock | 2.00 |
| MB07012 | 1x 54mm 3/32 Hard Steel Blank Axle with Flats for grub screw fastenings | In Stock | 3.00 |
| MB19090 | 1x 54mm 3/32 Hard Steel Blank Axle | In Stock | 2.60 |
| MB19094 | 1x 54mm 3/32 Titanium Blank Axle (Ultra Light 1gr) | In Stock | 3.50 |
| MB19046 | Pack of 4x Rear axle spacers with M2 grub screw for 3/32 axles. Ideal for using with angle or sider winder gearing. | In Stock | 5.50 |
| MB19047 | Pack of 4x 4WD Pulley with M2 grub screw fixing for 3/32 axle. | In Stock | 5.50 |
| MB19092 | Independant Axle kit for use with 19006 or 19015 wheels | Sold Out | |
| top | |||
| Ref | PROP-SHAFT KITS | Availability | Price |
| MB19024 | 2x Bronze Prop-shaft bearings | In Stock | 5.00 |
| MB19093 | 2x Prop-shafts 36mm & 45mm long | In Stock | 4.00 |
| MB19110 | 10x Prop-shaft connecting springs | In Stock | 2.50 |
| top | |||
| Ref | CONSUMABLES | Availability | Price |
| MB19040 | 10x 0.7mm chrome flat axle spacers | In Stock | 3.30 |
| MB19041 | 10x 0.5mm chrome flat axle spacers | In Stock | 3.30 |
| MB19042 | 10x 0.25mm chrome flat axle spacers | In Stock | 3.30 |
| MB19043 | 10x 3.0mm chrome flat axle spacers | In Stock | 3.30 |
| MB19044 | 10x 2.0mm chrome flat axle spacers | In Stock | 3.30 |
| MB19045 | 10x 1.0mm chrome flat axle spacers | In Stock | 3.30 |
| MB19300 | 15x metric body mounting screws long | In Stock | 3.00 |
| MB19301 | 15x metric body mounting screws short | In Stock | 3.00 |
| MB19302 | 10x M2 Motor fastening screws (5x Pan Head & 5x Countersink) | In Stock | 2.50 |
| top | |||
| Ref | WHEELS (for use with 3/32 axles) | Availability | Price |
| MB19005 | MB Slot 2x F1 Alloys wheels with M2 grub screws 6hole. (Will accept Ninco or NSR F1 tyres) | In Stock | 8.50 |
| MB19006 | MB Slot 2x Alloys wheels 16.8x8mm (For use with MB19092 independant front axle unit only) | In Stock | 7.50 |
| MB19007 | MB Slot 2x Alloys wheels with M2 grub screws 17.2x8mm narrow boss 6hole. | In Stock | 10.20 |
| MB19008 | MB Slot 2x Alloys wheels with M2 grub screws 15.8x8mm for use on front axles with MB30013 hard compound low profile tyres | In Stock | 10.20 |
| MB19009 | MB Slot 2x Alloys wheels with M2 grub screws 18.1x10mm narrow boss 6hole. | In Stock | 10.20 |
| MB19010 | MB Slot 2x Alloys wheels with M2 grub screws 18.6x8
standard boss 8hole. Suit Fly truck fronts, Ninco JGTC, Raid cars etc |
In Stock | 10.00 |
| MB19011 | MB Slot 2x Alloy Twin Wheels with M2 grub screws for Fly trucks each wheel accepts 2x standard Fly truck tyres. 18x18.5mm | In Stock | 13.00 |
| MB19012 | MB Slot 2x Alloys wheels with M2 grub screws 16.8x10mm narrow boss 8hole with airway for 3/32axle. Accepts MB slot wheel inserts / 12 | In Stock | 10.20 |
| MB19013 | MB Slot 2x Alloys wheels with M2 grub screws 15.8x8mm standard boss 8hole with airway. Accepts MB slot wheel inserts /13 | In Stock | 10.20 |
| MB19014 | MB Slot 2x Alloys wheels with M2 grub screws 15.8x12mm for MG Vanquish standard boss 8hole accepts MB slot wheel inserts /12 | In Stock | 11.00 |
| MB19015 | MB Slot 2x Nylon CNC machined wheel hubs 15.8x8mm standard boss Accepts MB Slot wheel inserts /13 (For use with MB19092 independant front axle unit only) | In Stock | 6.80 |
| MB19016 | MB Slot 2x Alloys wheels with M2 grub screws 17.2x10mm narrow boss 6hole with airway. Accepts MB slot wheel inserts /12 | In Stock | 10.20 |
| MB19017 | MB Slot 2x Alloys wheels with M2 grub screws 15.8x10mm narrow boss 8hole with airway. Accepts MB slot wheel inserts /13 | In Stock | 10.20 |
| MB19018 | MB Slot 2x Alloys wheels with M2 grub screws 16.8x8mm narrow boss 8hole with airway. Accepts MB slot wheel inserts /12 | In Stock | 10.20 |
| MB19019/a | MB Slot Ultra light 0.75gr Alloy wheels with M2 grub screws for 3/32 axle 17.2x 8.5mm. Accepts MB Slot wheel inserts /12 | In Stock | 11.60 |
| MB19019/b | MB Slot Ultra light 0.85gr Alloy wheels with M2 grub screws for 3/32 axle 17.2x10mm. Accepts MB Slot wheel inserts /12 | In Stock | 11.60 |
| top | |||
| Ref | MAGNESIUM ALLOY WHEELS | Availability | Price |
| MB08020 | MB Slot 2x Magnesium Alloy Wheels with M2 grub screws for 3/32 axle 15x10mm | In Stock | 11.50 |
| MB08021 | MB Slot 2x Magnesium Alloy Wheels with M2 grub screws for 3/32 axle 15x8mm | In Stock | 11.50 |
| MB08022 | MB Slot 2x Magnesium Alloy Wheels with M2 grub screws for 3/32 axle 15x10mm with air system | In Stock | 11.50 |
| MB08023 | MB Slot 2x Magnesium Alloy Wheels with M2 grub screws for 3/32 axle 15x8mm for use as low profile front hibs use with MB30013 low profile zero grip tyres | In Stock | 10.00 |
| top | |||
| Ref | WHEELS INSERT | Availability | Price |
| MB19201/12 | MB Slot 4x Photo-etch 5 star double spoke wheel inserts with brake discs to fit MB Slot wheels 16.8mm diameter | Sold Out | |
| MB19201/13 | MB Slot 4x Photo-etch 5 star double spoke wheel inserts with brake discs to fit MB Slot wheels 15.8mm diameter | Sold Out | |
| MB19202/12 | MB Slot 4x Photo-etch BBS style wheel inserts with brake discs to fit MB Slot wheels 16.8mm diameter | Sold Out | |
| MB19202/13 | MB Slot 4x Photo-etch BBS style wheel inserts with brake discs to fit MB Slot wheels 15.8mm diameter | Sold Out | |
| MB19203/12 | MB Slot 4x Photo-etch 18spoke wheel inserts with brake discs to fit MB Slot wheels 16.8mm diameter | Sold Out | |
| MB19203/13 | MB Slot 4x Photo-etch 18spoke wheel inserts with brake discs to fit MB Slot wheels 15.8mm diameter | Sold Out | |
| MB19205/12 | MB Slot 4x Photo-etch Ferrari Style wheel inserts to fit MB Slot wheels 16.8mm diameter | Sold Out | |
| MB19205/13 | MB Slot 4x Photo-etch Ferrari Style wheel inserts to fit MB Slot wheels 15.8mm diameter | Sold Out | |
| MB19206/12 | MB Slot 4x Photo-etch Porsche Classic Style wheel inserts to fit MB Slot wheels 16.8mm diameter | Sold Out | |
| MB19206/13 | MB Slot 4x Photo-etch Porsche Classic Style wheel inserts to fit MB Slot wheels 15.8mm diameter | Sold Out | |
| top | |||
| Ref | TYRES | Availability | Price |
| MB30001 | 4x Rubber Tyres 20 x 10.5mm to fit MB Wheels 15.8mm or 16.8mm diameter | In Stock | 5.00 |
| MB30002 | 4x Rubber Tyres 19 x 10.5mm to fit MB Wheels 15.8mm or 16.8mm diameter | In Stock | 5.00 |
| MB30003 | 4x Tyres 20 x 10.5 (for use with wheels 17.2 / 18.1mm) | In Stock | 5.00 |
| MB30004 | 4x Rubber Tyres (Fit Fly Trucks & 19010 or 19011 hubs) | In Stock | 5.00 |
| MB30005NR | 4x Natural Rubber Tyres 20x11 to fit MB Wheels 15.8mm or 16.8mm diameter | In Stock | 5.00 |
| MB30006S | 4x Silicon Tyres 20x11 to fit MB Wheels 15.8mm or 16.8mm diameter | In Stock | 5.00 |
| MB30010 | 4x Zero Grip Hard tyres 17x8 ideal for front hubs | In Stock | 5.00 |
| MB30011 | 4x Tyres 19 x 8.5mm Soft Rubber (for wheels 15.8/16.8) | In Stock | 5.00 |
| MB30012 | 4x Tyres 19 x 8.5mm Hard Rubber (for wheels 15.8/16.8x8) | In Stock | 5.00 |
| MB30013 | 4x Tyres Zero Grip 17 x 8.5 (for use with MB19008 & MB08023 alloy wheels only) | In Stock | 5.00 |
| MB30014 | 4x Tyres 19 x 8.5mm (for use with wheels 17.2 / 18.1mm) | In Stock | 5.00 |
| top | |||
| Ref | OILS, TYRE CONDITIONERS & BRAID CONDITIONERS | Availability | Price |
| MB19060 | Motor Cleaner 250ml | In Stock | 7.00 |
| MB19061 | Oiler for Bearings & Bushings 15ml | In Stock | 6.00 |
| MB19062 | 'Magic Tyres' Liquid Tyre Softener 250ml | In Stock | 10.00 |
| MB19063 | 'Grip' Liquid for tyres 50ml | In Stock | 5.00 |
| MB19064 | Braid Conditioner / Cleaner 50ml | In Stock | 5.00 |
| top | |||
| Ref | ULTRA LIGHT WINDSCREEN INTERIORS | Availability | Price |
| MB19150 | Ultra Light vac-form windscreen & interior for Ninco Toyota Supra | Sold Out | |
| MB19151 | Ultra Light vac-form windscreen & interior for Ninco Honda NSX | Sold Out | |
| MB19152 | Ultra Light vac-form windscreen & interior for Ninco Renault Megane | Back Order | |
| MB19153 | Ultra Light vac-form interior for Slot.it Sauber Mercedes | Ltd Stock | 4.00 |
| MB19154 | Ultra light vac-form interior for Proslot / Scaleauto Toyota Gt1 | Ltd Stock | 4.50 |
| top | |||
| Ref | TOOLS | Availability | Price |
| MB19036 | MB Slot Gear Puller - removes pinion gears. Ideal for removing sidewinder pinions with minimal space between motor can & pinion. | In Stock | 14.50 |
| MB19037 | MB Slot Pinion Press. For fitting pinion gears on the motor shaft without damaging the pinion or armature shaft. | In Stock | 21.50 |
| MB19400 | Car set up plate - perspex set up plate for 1/32th scale cars | In Stock | 11.00 |
| MB19424 | Car set up plate - perspex set up plate for 1/24th scale cars | In Stock | 14.95 |
| MB19401 | Winners Podium Perspex Display | In Stock | 36.00 |
| MB08001 | Motor Bench Complete Kit with scales (requires battery) Measures Motor Torque More Info | In stock | 35.00 |
| MB08002 | Motor Bench kit (without display scales) Measure Motor Torque More Info | In Stock | 20.00 |
| top | |||
| Ref | 1/24th ALLOY WHEEL HUBS (suitable for 3mm axles) | Availability | Price |
| MB241808 | 18 x 8mm Alloy Wheels with M2 grub screws (for 3mm axles) for 1/24 scale cars ideal for sponge tyres |
In Stock | 7.00 |
| MB241813 | 18 x 13mm Alloy Wheels with M2 grub screws (for
3mm axles) for 1/24 scale cars ideal for sponge tyres |
In Stock | 7.50 |
| MB241815 | 18 x 15mm Alloy Wheels with M2 grub screws (for 3mm axles) for 1/24 scale cars ideal for sponge tyres |
In Stock | 8.00 |
| MB242108 | 21 x 8mm Alloy Wheels with M2 grub screws (for 3mm
axles) for 1/24 scale cars ideal for sponge tyres |
In Stock | 7.00 |
| MB242113 | 21 x 13mm Alloy Wheels with M2 grub screws for (for 3mm
axles) for 1/24 scale cars ideal for sponge tyres |
In Stock | 7.50 |
| MB242115 | 21 x 15mm Alloy Wheels with M2 grub screws (for
3mm axles) for 1/24 scale cars ideal for sponge tyres |
In Stock | 8.00 |
| top | |||
| Ref | Axle Spacers for 3mm Axles | Availability | Price |
| MB09001 | 10x 3mm Axle Spacer 1mm long | In Stock | 3.30 |
| MB09002 | 10x 3mm Axle Spacer 2mm long | In Stock | 3.30 |
| MB09003 | 10x 3mm Axle Spacer 3mm long | In Stock | 3.30 |
| MB09004 | 10x 3mm Axle Spacer 4mm long | In Stock | 3.30 |
| MB09005 | 10x 3mm Axle Spacer 5mm long | In Stock | 3.30 |
| top | |||
Prices are in GB Pounds Sterling and include VAT @ 17.5% (from 1st January
2010). Overseas Customer take advantage of VAT Free sales for orders outside
EU.
To place an order simply click on the ONLINE ORDER button at the bottom of the
menu and complete the required info.