Pendle Slot Racing sourced spares, budget prices For popular items - supplied in Minimalistic Packaging!
  |
| Slot Car Setup Plates - 1:32nd Scale | ||||
| PSRE28-PSR |  |
Slot Car Setup Plate - Logo Perspex clear plastic with two sides, flat side for checking the cars chassis, tyre and body clearance and the other side is used to sit the car on without the four wheels touching any surface, this will reduce the risk of flat spotting your tyres or collecting dust. with guide slot for 1/32nd cars |
In Stock | 9.95 |
| PSRE28 |  |
Slot Car Setup Plate - Clear Perspex clear plastic with two sides, flat side for checking the cars chassis, tyre and body clearance and the other side is used to sit the car on without the four wheels touching any surface, this will reduce the risk of flat spotting your tyres or collecting dust. with guide slot for 1/32nd cars |
In Stock | 9.95 |
| Motors & Parts | ||||
| PSRAC4 |  |
Mabuchi Motor 18.000rpm End Bell Drive (Scalextric / Fly equivalent) | In Stock | 4.00 |
| PSRE13 |  |
Silicone motor cable red o/d 2mm (1Meter) | In Stock | 2.50 |
| PSRE14 |  |
Silicone motor cable black o/d 2mm (1Meter) | In Stock | 2.50 |
| PSRE29 |  |
1x motor mounting plate & 2x screws - for slimline motors | In Stock | £1.50 |
| Vacform Interior | ||||
| PSRE30 |  |
Generic Plastic lightweight interior | In Stock | £0.75 |
| Magnets | ||||
| PSRM1 |  |
8mm x 5mm neodinium circular magnet. Same size as used in various Fly, Ninco, NSR cars etc | In Stock | 1.50 |
| PSRM2 |  |
15mm x 6mm x 3mm neodinium rectangular magnet. Same size as used in various Fly cars & PCS Chassis kits | In Stock | 1.50 |
| Allen Keys | ||||
| PCSAK01 |  |
Allen Key (for use with Slot.it grub screws) | In Stock | 0.95 |
| PCSAK02 |  |
Allen Key (for use with NSR grub screws) | In Stock | 0.95 |
| Bearings | ||||
| PCSAB01 |  |
2x Brass Bearings for 3/32 axles | Sold Out | |
| Axles & Parts | ||||
| PCSA37 |  |
2x 3/32 Stainless Steel Axle blank 37mm Long | In Stock | 1.75 |
| PCSA40 | |
2x 3/32 Stainless Steel Axle blank 40mm Long | In Stock | 1.75 |
| PCSA45 | |
2x 3/32 Stainless Steel Axle blank 45mm Long | In Stock | 1.75 |
| PCSA50 | |
2x 3/32 Stainless Steel Axle blank 50mm Long | In Stock | 1.75 |
| PCSA51 | |
2x 3/32 Stainless Steel Axle blank 51mm Long | In Stock | 1.75 |
| PCSA55 | |
2x 3/32 Stainless Steel Axle blank 55mm Long | In Stock | 1.75 |
| Braids | ||||
| PSRE16 |  |
Standard Tinned copper braid - ideal for replacing braids on old scalextric cars (1Meter). For best results use with PSRP2 Braid conditioner for improved electrical contact & pick up | In Stock | 2.50 |
| PSRE16a |  |
Racing Tinned copper braid (1Meter) - thinner than the standard braid ideal for race car set up. 0.3mm thick x 4mm wide. For best results use with PSRP2 Braid conditioner for improved electrical contact & pick up | In Stock | 3.00 |
| PSRE17 |  |
Standard Copper braid - ideal for replacing braids on Ninco, Fly, SCX etc (1 Meter). For best results use with PSRP2 Braid conditioner for improved electrical contact & pick up | In Stock | 2.50 |
| Braid Conditioners, Oil & Glue | ||||
| PSRP1 |  |
Pin point oiler ideal for motor, axle bearings etc. | In Stock | 2.50 |
| PSRP2 |  |
Braid conditioning liquid, improves electrical pick up | In Stock | 2.50 |
| PSRP3 |  |
Tyre conditioner - softens & improves tyre grip | In Stock | 2.50 |
| CA005 |  |
Glue - FlexyCyano, Black rubber toughened flexible high impact cyano Ideal for gluing tyres to wheels (Please Note - requires storing in cool temperature) |
In Stock | 4.95 |
| CA007B |  |
Glue - Odourless Non whitening glue - Super strength bond Ideal for scratch building (Please Note - requires storing in cool temperature) |
In Stock | 5.95 |
| Weight | ||||
| PSRE24 |  |
Weight kit approx 2mm x 50mm x 75mm. Lead sheet with self adhesive backing. Ideal for adding weight to inside of chassis. Simply cut to desired size. Each lead sheet approx 76gms weight | Sold Out | |
| PSRE24a | |
Weight kit approx 1.5mm x 50mm x 75mm. Lead sheet with self adhesive backing. Ideal for adding weight to inside of chassis. Simply cut to desired size. Each lead sheet approx 56gms weight | In Stock | 2.00 |
| Screws & Washers | ||||
| PSRE21A |  |
10x6mm course thread body screws ideal for Resin / plastic | In Stock | 1.25 |
| PSRE21B |  |
10x8mm course thread body screws ideal for Resin / plastic | In Stock | 1.25 |
| PSRE19 |  |
4x M2 stainless steel grub screws for Alloy Wheels (same size as used by Slot.it etc) | In Stock | 1.25 |
| PSR4 |  |
20x 2.5mm nylon axle spacers ideal for 3/32 or 2.5mm axles. Use to remove excess lateral movement in axles. | In Stock | 1.00 |
| PSR4a | |
20x 2mm nylon spacers. Ideal for using as axle spacers or guide washers | In Stock | 1.00 |
| PSR4b | |
20x 3mm nylon axle spacers. Ideal for use on 1/8 or 3.mm axles. Use to remove excess lateral movement in axles | In Stock | 1.00 |
Prices are in GB Pounds Sterling and include VAT @ 20.00% (from 4th January
2011). Overseas Customer take advantage of VAT Free sales for orders outside
EU.
To place an order simply click on the ONLINE ORDER button at the bottom of the
menu and complete the required info.