Scalextric Sport Tuning Spares
Up to 50% off
Up to 50% offWe have divided Scalextric spares into 4 categories, General,
Restoration,
2002 Onwards
Tuning Spares
For help with finding the correct part numbers for repalcement spares view the
Scalextric Service sheets
Scalextric Sport Tuning Spares are a new range of spares designed to easily
modify your cars. Please note that the axles used in this range are 3mm diameter
which is larger than that used on the standard range of cars. ie. It is not
possible to fit the alloy wheels on standard axles you need to use the 3mm axles
in the Sport Tuning range
Example - To replace an axle in a Scalextric F1 car you could use the following,
C8410 wheels + C8406 axles + C8404 contrate gears + C8407 or C8408 axle bearings.
We are pleased to offer a spares ordering service for replacement spares on current Scalextric cars.
  |
| Ref. | Generic Spares | £ | ||
| C8420 |
 |
DEEP ROUND GUIDE WITH SPRING & 4X REPLACEMENT BRAID PLATES | In Stock | 3.70 |
| C8427 |
 |
MAGNETS ROUND/RECTANGLE PK 7 (2x Rectangular, 4x Circular, 1x Stepped) |
Sold Out | |
| C8428 |
 |
2x LENGTHS OF SILICON MOTOR WIRE 60mm with 6x BRAID CONTACTS |
In Stock | 1.30 |
| C8429 |  |
36x COUNTER SUNK BODY SCREWS (6, 8, 12mm Pozi 2mm Diameter) (6, 8, 12mm Pozi 2.3mm Diameter) |
In Stock | 1.30 |
| Pinions & Gears | ||||
| C8401 |  |
Scalextric Gear Puller Use this tool for changing crown or spur gears on standard cars or for removing and replacing motor pinions with pin-point accuracy |
In Stock | 6.00 |
| C8402 |  |
PACK OF 10 ASSORTED PINIONS 2x8, 2x9, 2x10, 2x11, 2x12 ( to fit SP CAN MABUCHI S TYPE MOTOR ONLY) |
In Stock | 7.80 |
| C8403 |
 |
PACK OF 10 ASSORTED PINIONS 2x8, 2x9, 2x10, 2x11, 2x12 ( to fit FF CAN SLIMLINE MOTOR ONLY) |
In Stock | 3.90 |
| C8404 |
 |
PACK of 5 ASSORTED CONTRATE GEARS 1x25z, 1x26z, 1x27z, 1x28z, 1x29z ( to fit 3mm axles only) |
In Stock | 5.50 |
| C8405 |
 |
PACK of 5 ASSORTED SPUR GEARS 1x35z, 1x36z, 1x37z, 1x38z ( to fit 3mm axles only) |
In Stock | 5.50 |
| Axles & Bearings | ||||
| C8406 |
 |
PACK OF 5x 3mm HALLOW AXLES ASSORTED LENGTHS 1x45mm, 1x47.5mm, 1x50mm, 1x52.5mm, 1x55mm (Use with C8404 or C8405 gears & C8407 bearings only) |
Sold Out | |
| C8407 |
 |
4x AXLE BEARINGS 3mm |
In Stock | 2.00 |
| C8408 |
 |
2x BALL RACE BEARINGS 3mm |
In Stock | 4.50 |
| Alloy Wheels & Silicon Tyres | ||||
| C8409 |
 |
2x LeMANS SIZE WHEEL HUBS & SILICON TYRES | In Stock | 4.00 |
| C8410 |
 |
2x F1/ INDY SIZE WHEEL HUBS & SILICON TYRES | In Stock | 4.00 |
| C8411 |
 |
2x AMERICAN CLASSIC SIZE WHEEL HUBS & SILICON TYRES | In Stock | 4.00 |
| C8412 |
 |
2x RALLY SIZE WHEEL HUBS & SILICON TYRES | In Stock | 4.00 |
| C8413 |
 |
4x SILICON TYRES SUIT LEMANS STYLE HUBS | In Stock | 2.25 |
| C8414 |
 |
4x SILICON TYRES SUIT F1 STYLE HUBS | In Stock | 4.50 |
| C8415 |
 |
4x SILICON TYRES SUIT AMERICAN CLASSIC STYLE HUBS | In Stock | 2.25 |
| C8416 |
 |
4x SILICON TYRES SUIT RALLY STYLE HUBS | Ltd Stock | 4.50 |
| C8417 |
 |
4x SILICON TYRES SUIT BMW MINI STYLE HUBS | In Stock | 2.25 |
| C8418 |
 |
4x SILICON TYRES SUIT NASCAR STYLE HUBS |
In Stock | 4.50 |
| Motors | ||||
| C8421 |
 |
SP MOTOR 20K RPM WITH WIRES To fit most Scalextric, Fly, MRRC etc |
In Stock | 6.00 |
| C8422 |
 |
SP MOTOR 25K RPM WITH WIRES To fit most Scalextric, Fly, MRRC etc |
Sold Out | |
| C8423 |
 |
SP MOTOR 30K RPM WITH WIRES To fit most Scalextric, Fly, MRRC etc |
In Stock | 6.00 |
| C8424 |
 |
FF MOTOR 20K RPM WITH WIRE To Fit Scalextric F1, MotoGP & Scalextric Classic cars |
In Stock | 6.00 |
| C8425 |
 |
FF MOTOR 25K RPM WITH WIRES To Fit Scalextric F1, MotoGP & Scalextric Classic cars |
In Stock | 6.00 |
| C8426 |
 |
FF MOTOR 30K RPM WITH WIRES To Fit Scalextric F1, MotoGP & Scalextric Classic cars |
In Stock | 11.99 |
| C8419 | SW MOTOR CARRIER Designed to fit SP Motors with C8408 Ball race bearings only. (Suitable for Lister Storm & Maserati MC12 Chassis only). |
Sold Out | ||
Prices are in GB Pounds Sterling and include VAT @ 20.00% (from 4th January
2011). Overseas Customer take advantage of VAT Free sales for orders outside
EU.
To place an order simply click on the ONLINE ORDER button at the bottom of the
menu and complete the required info.
Please note we have a minimum spares order value
of £5 excluding postage