A selection of Slot car tools to help with the biulding & performance of your your slot cars.
|
 |
||||
| Ref. | Hudy - Tyre Truer | Availability | £ | |
| 3100 |  |
Hudy Slot Car Tyre Truer - superb quality mini lathe type tyre truer. Grinds tyres perfectly flat in seconds. Comes with 2 axle sizes 3/32 & 1/8. Ideal for use with Aluminium or palstic wheels, glue tyre to rim then true tyre in seconds to desired diameter. Requires 12v Battery or suitable power supply (See Power/control) | In Stock | 120.00 New lower price |
| Hudy Spares | ||||
| 3040 | Replacement grinding drum for Hudy Tyre Truer | In Stock | 20.00 | |
| 3059 | Replacement drive belts x3 for hudy Tyre Truer | In Stock | 3.99 | |
 |
||||
|
||||
| Ref. | Slot Cars Technology - Tyre Truer | Availability | £ | |
| 1402PV4 |  |
Slot Cars Technology tyre truer Grinds tyres perfectly flat in seconds. Comes with 3/32 axle. Ideal for use with any type of alloy wheels, glue tyre to rim then true tyre in seconds to desired diameter. Requires 12v Battery or suitable power supply (See Power/control) | In stock | 115.00 |
| Spares | ||||
| 1402P120 | One Replacement grinding drum 120 grit | In Stock | 1.25 | |
| 1402P150 | One Replacement grinding drum 150 grit | In Stock | 1.25 | |
| 1402P180 | One Replacement grinding drum 180 grit | In Stock | 1.25 | |
| 14029 | Axle 2.38mm | In Stock | 0.95 | |
| 140210 | Axle 2.37mm | In Stock | 0.95 | |
| 140211 | Axle 2.48mm | In Stock | 0.95 | |
| 1402PMIX | Three Replacement grinding drum 120, 150, 180 | In Stock | 3.50 | |
| 1402S9B | Axle holder 14029 | In Stock | 3.50 | |
| 1402S10B | Axle holder 140210 | In Stock | 3.50 | |
| 1402S11B | Axle holder 140211 | In Stock | 3.50 | |
| 1402S9M | Mono wheel axle 3/32 2.38mm for slot.it hub with axle holder 2.38 | In Stock | 3.95 | |
| 1402S10M | Mono wheel axle 3/32 2.37mm for NSR hub with axle holder 2.37 | In Stock | 3.95 | |
| 1402S11M | Mono wheel axle 3/32 2.48mm for Ninco hub with axle holder 2.48 | In Stock | 3.95 | |
| 1402S9 | Axle 3/32 2.38mm for slot.it hub with axle holder 2.38 | In Stock | 6.50 | |
| 1402S10 | Axle 3/32 2.38mm for NSR hub with axle holder 2.37 | In Stock | 6.50 | |
| 1402S11 | Axle 3/32 2.48mm for Ninco hub with axle holder 2.48 | In Stock | 6.50 | |
|
||||
|
||||
| Ref. | Gear Pullers / Pushers | Availability | £ | |
| C8401 |  |
Scalextric Gear Puller Use this tool for changing crown or spur gears on standard cars or for removing and replacing motor pinions with pin-point accuracy |
In Stock | 9.00 |
|
||||
| MB19036 |  |
MB Slot Gear Puller - removes pinion gears. Ideal for removing sidewinder pinions with minimal space between motor can & pinion. | In Stock | 9.50 |
|
||||
| MB19037 |  |
MB Slot Pinion Press. For fitting pinion gears on the motor shaft without damaging the pinion or armature shaft. | In Stock | 15.00 |
|
||||
| N80201 |  |
Ninco Gear Puller / Press - removes and refits gears from motor shafts. | In Stock | 12.25 |
|
||||
| 80201/a |  |
Ninco Gear Puller / Press Adaptor - holds motor in place while removing/refitting pinion | In Stock | 4.95 |
|
||||
|
||||
| Ref. | Slot car set up plates | Availability | £ | |
| GOM029 |  |
GOM 1/24th Scale Perspex Flat plate with guide slot - ideal for checking chassis set up on 1/24th & 1/32nd Scale cars. Size of plate 220mm x 110mm x 8mm | Sold Out | |
|
||||
| MB19400 |  |
MB Slot 1/32nd Scale Set Up Plate with guide slot ideal for checking chassis set up on 1/32nd Scale cars. Size of plate 180mm x 80mm x 10mm. Use reverse side to store cars without flat spotting tyres. | In Stock | 8.00 |
|
||||
|
||||
| Ref. | Slot car racing checkers | Availability | £ | |
| Mag1 |  |
Magnet Marshal Slot car scales designed to measure the weight and magnetic downforce of 1/32 slot cars and some 1/24 cars |
In Stock | 60.00 |
|
||||
| DS-090 |  |
DS Pocket Checker - Hand Held electronic display with built in magnet checker measuring Gauss rating up to 1,000 gauss from motors or magnets. The device also checks and verifies RPM from motors or axles with a range of 1 to 50,000rpm. Supplied with full instructions. Requires standard 9v Battery (not supplied) Size 10cm x 5cm x 2.5cm | Sold Out no Longer in production |
|
|
||||
|
||||
| Ref. | Soldering Irons | Availability | £ | |
| Y061 |  |
48W Temperature Controlled Soldering Station A professional quality soldering station with full temperature control. Digital temperature presetting and temperature monitoring. High power heating element raises the bit to working temperature in less than 1 minute. Temperature fully variable between 150°c and 480°c. 220/240v |
In Stock | 60.00 |
|
||||
 |
40W Soldering Iron Ideal for small soldering tasks such as removal / refitting motor wires etc. |
In Stock | 6.00 | |
|
||||
| |
||||
Prices are in GB Pounds Sterling and include VAT @ 17.5%. Overseas Customer take advantage of VAT Free sales for orders outside EU. To place an order simply click on the ONLINE ORDER button at the bottom of the menu and complete the required info.