+44 (0) 1282 612418 | CONTACT US

0item(s)

You have no items in your shopping basket.

Product was successfully added to your shopping basket.

MR Slotcar Evolution Metal Chassis Kit A

Ref: SR-1001

Quick Overview

MR Slotcar Evolution Metal Chassis Kit A - for conversion of Slot-it group C cars - Lancia LC2, Porsche 956/962, Jaguar XJR9 and Mercedes C9.

Availability: Out of stock

Details

MR Slotcar Evolution Metal Chassis Kit A.

Metal chassis for conversion of Slot-it group C cars - Lancia LC2, Porsche 956/962, Jaguar XJR9 and Mercedes C9.

The chassis can be adapted to other makes of 1/32 scale Slot Cars and Model Kits.

THE CHASSIS KIT

Included in the kit is all the required hardware and components that allow you to convert your car from the current plastic chassis to a metal one. The Guide Holder Support also allows two separate mounting positions depending on the model you choose to convert. ALL components from your Slot It car, aside from the plastic chassis, is all you need to assemble your new “Evolution” Metal Chassis Car. A handy wrench needed to secure the “ny-lock” nuts is also provided in the kit.

TECHNICAL

To begin, choose a Slot It car from the ones above. Then look at the chart below and follow the instructions regarding the Wheelbase length and the Guide Holder Position, either Forward or Back (F/B). The chart also tells you which body post tube is to be used – both front and rear. The Body Post Tubes are colour coded so it’s easy to choose the right one.

In addition to the chart, there are some specific assembly notes that pertain to each respective car, so you know ahead of time which are easier or more involved to adapt the body to the chassis.

Keep in mind that these kits were designed to cover as many different Slot It body types as possible - so a little patience might be needed with some models more so than others… But don’t be concerned as you’ll see these are just minor.

This chart will tell you the Kit Version you’ll need, the wheelbase position (WB) you’ll need to assemble in order to suit the model you’ve chosen and the Body Post Tubes required at both rear/front positions (R/F).

Kit “A” has a “Regular” length Guide Holder Support, while Kit “B” has a “Long” one. These two pieces are available separately so you can easily convert an “A” Kit to a “B” Kit – and vice versa.

This chassis kit allow you to build up to 9 different wheelbase length cars - ranging from 82.2mm up to 88.2mm long.

The Wheelbase position is determined by selecting one of the 9 positions on the Chassis (refer to pictures)
There are two rows of holes, with the Inboard Row providing 4 positions while the Outboard one allows 5.
For reference, the Inboard row has positions noted as I1, I2, I3 and I4 - with I1 being the shortest and I4 the longest.
Similarly, the Outboard row has positions noted as O1, O2, O3, O4 and O5 - O1 being the shortest and O5 the longest

KIT “A” Wheelbase Body Post (R/F) Guide

Lancia LC2 WB-O2/83.7mm RED/BLUE F
P. 956KH WB-O1/82.2mm GREEN/BLUE F
P. 962C WB-O2/83.7mm GOLD/BLUE B
P. 962IMSA WB-O2-83.7mm GOLD/BLUE B
Jag. XJR9 WB-O1/82.2mm RED/RED F
Merc. C9 WB-O2/83.7m RED/BLUE F

TRIMMING ON SOME MODELS

Keep in mind the trimming required is minor and doesn’t detract from the look of the car

Lancia LC2
1. The front body post needs to be shortened by approximately 3 mm in length to fit the Body Post Tube properly
2. The front wheel area (trailing side) need to be trimmed about 1 mm to allow the chassis to clear.
3. A part of the rear of the body is attached to the chassis so it would need to be cut from the chassis and attached to the body to close off the back end. This is an option

Porsche 956KH
1. No Body trimming required on this car

Porsche 962C
1. No Body trimming required on this car

Porsche 962IMSA
1. No Body trimming required on this car

Jaguar XJR9
1. The underside of the cockpit requires some trimming to clearance the front end of the Motor Pod

Additional Information

Ref SR-1001
Brand MR Slotcar
Scale 1/32

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Secure Online Shopping

Payments by Sage Pay


We only charge for items when ready to be dispatched

Payment by card or PayPal is pre-authorised online and is only charged when the items are ready to be dispatched.

Pre-order items will only be charged when the product arrives in-stock and is ready to be dispatched.

Payment Info

UK, Europe and Worldwide Delivery

Worldwide Delivery Service

 

Postage & Packaging

The shipping price is dynamically calculated at the checkout pages - Delivery info

At Pendle Slot Racing we take great care and pride in making sure that each parcel is securely packed.

Related Products