PCS F2 Modelstox Kit

PCS F2 Modelstox - 1/28th display model kit.

Designed and developed by Pendle Slot Racing and produced in high-quality 3D print.

This F2 Modelstox includes extra details compared to the F2 Slotstox version, including front grille, battery, fuel tank and front/rear suspension details. This version is perfect for customers who want a higher detailed display model without the slot car mechanical parts.

UK Stock Car Racing goes right back to 1954 and continues to have a loyal following today. The short-oval race series is a fast and tough contact motorsport, with none stop action from the drop of the green flag.

The F2 Stock car is a single seater custom-built car, rear-wheel drive and powered by a 2L engines at the front. Constructed of both section and tubular steel, they feature a robust chassis and roll cage, plus front and rear bumpers with side nerf bars. The bumpers are used to strategically push their opponents wide from the racing line in order to overtake them, deliberate full-on fencing and following-in is not allowed. Cars are also usually fitted with an aerofoil mounted on top of the roof. Some drivers may use two separate cars, which are either setup for tarmac or shale tracks.

Races are held on short oval tracks around the UK, either a shale or tarmac surface of up to a quarter mile in length and are surrounded by crash fencing. The number of drivers per race can be between around 20-30 cars.

PSR Blog - F2 Stock Car Kit

THIS KIT IS A DISPLAY MODEL ONLY - The F2 stock car is also available in Slotstox version.

Two Modelstox kit options available:

Body & Chassis Kit

• 1 3D printed F2 body (choose Short or Large wing)
• 1 3D printed F2 chassis frame
• 2 3D printed rear wheel guards
• 1 3D printed chassis base with battery and fuel tank detail
• 1 3D printed exhaust
• 1 3D printed air filter
• 1 3D printed interior
• 1 Resin driver figure
• 1 Resin helmet
• 1 3D printed head restraint safety device
• 1 Resin steering wheel
• 1 3D printed front/rear suspension details (4pcs)
  
  

Body & Chassis + Parts Kit

• 1 3D printed F2 body (choose Short or Large wing)
• 1 3D printed F2 chassis frame
• 2 3D printed rear wheel guards
• 1 3D printed chassis base with battery and fuel tank detail
• 1 3D printed exhaust
• 1 3D printed air filter
• 1 3D printed interior
• 1 Resin driver figure
• 1 Resin helmet
• 1 3D printed head restraint safety device
• 1 Resin steering wheel
• 1 3D printed front/rear suspension details (4pcs)
• 2 PCS-32141207 aluminium wheels (4pcs)
• 1 W11106 tyre pack (4pcs)
• 1 PCS-INS11a-3DP wheel inserts (4pcs)
• 1 Slot-it SIPA01-51 axles (2pcs)
  
  

F2 Modelstox Measurements

• Length:104mm
• Width: 63mm
• Wheelbase: 67mm
  
  

Tool Required

• Allen Key 0.9mm for wheel grub screws
• Screwdrivers - Flat and Phillips
• Glue
• Paint /decals for livery